| 项目Item | 规格 Specification | SCT110F | SCT140F | SCT160F | SCT200F | |||||
| A | B | A | B | A | B | A | B | |||
| 注射装置 | INJECTION UNIT | |||||||||
| 螺杆直径 | Screw diameter | mm | 25 | 28 | 28 | 32 | 32 | 35 | 35 | 38 |
| 螺杆长径比 | Screw L/D ratio | L/D | 22.6 | 20.2 | 22.6 | 19.8 | 22.6 | 20.7 | 22.6 | 20.8 |
| 理论注射容量 | Shot volume(therretical) | cm³ | 61 | 77 | 86 | 113 | 129 | 154 | 168 | 198 |
| 注射重量 | Injection weight(ps) | g | 56 | 70 | 78 | 102 | 117 | 140 | 153 | 181 |
| 注射压力 | Injection pressure | Mpa | 314 | 250 | 311 | 238 | 310 | 259 | 309 | 262 |
| 螺杆转速 | Screw speed | rpm | 200 | 200 | 200 | 200 | ||||
| 合模装置 | CLAMPING UNIT | |||||||||
| 合模力 | Clamping force | KN | 1100 | 1400 | 1600 | 2000 | ||||
| 移模行程 | Open stroke | mm | 350 | 380 | 435 | 500 | ||||
| 拉杆间距(宽x高) | Space between tie bars(WxH | mm | 360*360 | 410*410 | 470*470 | 525*525 | ||||
| 最大模厚 | Max.Mould height | mm | 380 | 450 | 520 | 530 | ||||
| 最小模厚 | Min.Mould height | mm | 150 | 160 | 180 | 200 | ||||
| 顶出行程 | Ejector stroke | mm | 100 | 120 | 135 | 150 | ||||
| 顶出力 | Ejector force | KN | 38 | 50 | 50 | 70 | ||||
| 其它 | OTHERS | |||||||||
| 最大油泵压力 | Max.pump pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 | ||||
| 油泵马达功率 | Pump motor power | kw | 24.1 | 24.1 | 31.1 | 31.1 | ||||
| 电热功率 | Heating power | kw | 5.05 | 6 | 8.7 | 9.7 | ||||
| 外形尺寸(长x宽x高) | Machine dimension(LxWxH) | m | 4.32*1.1*1.9 | 4.75*1.19*1.98 | 5.28*1.34*2.06 | 5.73*1.44*2.21 | ||||
| 油箱容积 | Oiltank cubage | L | 155 | 155 | 205 | 205 | ||||
| 机器重量 | Machine weight | t | 3.1 | 3.4 | 5.0 | 6.8 | ||||
| 注1.机器高度含垫脚高度！Machine height includes the height of the base! | ||||||||||
| 2.本公司将保留配置更改权，上述配置如有变动，恕不另行通知！Our company reserves the right to make configuration changes, and any changes to the above configuration will not be notified separately! | ||||||||||
